Hydrotech Reverse Osmosis Drinking Water System c_w Booster User Manual

#92364 12/10

8PRODUCT WATER FAUCET SITE PREPARATIONRefer to Faucet Installation Instructions (Page 6) for site location and mounting hole specications.Primary con

9PRODUCT WATER FAUCET INSTALLATION New Faucet InstallationRefer to Faucet Site Preparation, selection on the last page.1. Lower faucet into mounting

10Installation of FiltersUnscrew the sumps with the help of wrench provided and install the filters as follows: A. Sump #1 - Install Sediment Pre-fil

11Connecting Componentsa. Connect the 1/4” white tube to the elbow of sump #1. The other end of the elbow should be connected to inlet saddle valve.

12Start-Up ProcedureWARNING: To prevent microbiological growth and freezing, this reverse osmosis system contains a preservative solution

13Maintenance ScheduleThis schedule is designed for the average potable water supply and should be followed to ensure the proper functioning of your d

Sanitization Procedures for your Reverse Osmosis SystemSanitization is a simple but important part of a regular maintenance routine requir

15Sanitization StepsSTEP 1: TURN OFF WATER SUPPLY - CLOSE INLET SUPPLY ALL THE WAYSTEP 2: DEPRESSURIZE SYSTEM - OPEN FAUCET SUPPLY UNTIL ALL WATER IS

STEP 8: POUR THE MIXED DISINFECTANT SOLUTION INTO THE 1ST PRE-FILTER SUMP AND RE-INSTALL.STEP 9: OPEN THE INLET VALVE AND OPEN THE F

17Reverse Osmosis Drinking Water System Maintenance RecordInstallation Date: ___________Use this chart to record the dates of any cartridge changes. I

IMPORTANT WARNING - PLEASE READSystem Flushing: This reverse osmosis system contains a preservative solution to prevent microbiological growth and fre

18Drawing No. Description Item No. 1 ... Tubing, 1/4” OD, poly, natural 115200 2 ... Valve, 3/8”, Shut

19Parts List and Drawing – Booster Pump (Part# 92325)123 Drawing # Description Item No. 1 CAP, ASSY, UPPER 92348 2 CAP,ASSY, LOWER 92349 3

REJECT WATEROUTLETFLOW CONTROLMEMBRANE HOUSING& RO ELEMENTPRODUCTWATER CHECKVALVEADDITIONAL NOTES:1. FILTER SUMP #1 a. 3 SUMP RO MODELS: PRE-SE

21Reverse Osmosis AccessoriesPUMPS92287 BOOSTER, 6800, RO SYSTEMS UP TO 50 GPD92317 BOOSTER, 8800, RO SYSTEMS UP TO 120 GPD92325 BOOSTER, KEMFLO, R

Limited WarrantySubject to the conditions and limitations described below, WaterGroup warrants its Economy Reverse Osmosis Drinking Water Treatment Sy

1INTRODUCTIONCongratulations, on the purchase of your new Reverse Osmosis Drinking Water System. Treated with care and regular maintenance, your new s

2Supplied Item ChecklistOut of the box, your new R.O. System should be supplied with the following items. If any items appear to be missing, please co

3

4INSTALLATION REQUIREMENTSREAD THIS ENTIRE INSTALLATION AND SERVICE GUIDE BEFORE BEGINNING INSTALLATIONThe Economy Reverse Osmosis Drinking Water

5INTER-COMPONENT CONNECTIONS Connections between cold water supply line, RO Module, storage tank, product water faucet, and drain line are accomplishe

6INSTALLATION INSTRUCTIONSSADDLE-TAPPING VALVE INSTALLATION ON COPPER TUBECAUTION: This saddle-tapping valve is not designed for installation on ex l

7DRAIN OUTLET ASSEMBLY INSTALLATION NOTE: State, provincial and local plumbing codes may prohibit use of saddle-tapping drain connections and may re