8/7/08 SOFTENERS AND IRON FILTERS Model 5600 SXT-User Programming Chart Time of Day FROM SERVICE MODE:- • To set Time of th
↓↓↓↓ Display is RC (RESERVE CAPACITY)→→→→display the reserve capacity in gallons. ↓↓↓↓ ↓↓↓↓ Display is SV (SOFTWARE VERSION)→→→→display the softw
↓↓↓↓ Display is CD (CURRENT DAY OF THE WEEK). Press UP/DOWN buttons to adjust the current day of the week. ONLY AVAILABLE IF DAY OF THE WEEK CONTROL
Press UP/DOWN buttons to adjust the value. ↓↓↓↓ ↓↓↓↓ Display is H (WATER HARDNESS) →→→→ Grains per Gallon for softener and ppm per gallon of iro
↓↓↓↓ Display is BR (BRINE RINSE) →→→→[Factory Setting: For Chemical Free Iron Filters 0 (0 minutes) For Iron Filters 50 (50 minutes)
Model 5600 SXT-Diagnostics Chart To enter the diagnostic mode, push and hold and button for 5 seconds. D
8/7/08 FILTERS Model 5600 SXT-User Programming Chart Time of Day FROM SERVICE MODE:- • To set Time of the Day push and hold
Model 5600 SXT- Master Programming Chart FROM SERVICE MODE:- • To enter master programming mode, set the Time of Day display to 12:01 P.M. ↓↓↓↓
Display is RS (RESERVE SELECTION) →→→→ Type of reserve [Factory Default Setting: RC (Fixed Reserve Capacity)]. Press UP/DOWN buttons to adjust the set
↓↓↓↓ Display is D (DAY OF WEEK) →→→→used to set the day of week in which the regeneration should occur [Factory Setting: OFF]. Press UP/DOWN buttons
Comments to this Manuals