Hydrotech 7000 Master Programming Mode User Manual

7000 Master Programming ModePage 1NOTE: 1. Set Time of Day Display to 12:01 P.M.2. Push and Hold the Set Down and Set Up Button for 5 Seconds.3. Press

7000 Master Programming ModePage 1041079 Insert Rev. D 01/04

7000 Master Programming ModePage 2Regeneration Day OverrideExample: Regenerate every 7 days [A- -7]Cancel Setting [AOFF] = DefaultRegeneration Cycle

7000 Master Programming ModePage 3Entering Master Programming ModeSet the Time of Day to 12:01 P.M., then press and hold both the Set Up and Set Down

7000 Master Programming ModePage 43. Regeneration Type (Display Code 7)Use this program step, identified by the number 7 in the first digit of the dis

7000 Master Programming ModePage 54. System Capacity (Display Code C) for US and metric with an extended (Display Code Ct) in metric where t denotes x

7000 Master Programming ModePage 66. Regeneration Time (No display Code)NOTE:This program step is not available for Regeneration Type Meter Immediate

7000 Master Programming ModePage 78. Regeneration Cycle Step Programming (Display Code 1 – 6)Use this program step to program the Regeneration Cycle s

7000 Master Programming ModePage 89. Flow Meter Size (Display Code F)NOTE:This program step is not available for Regeneration Type Time Clock Delayed

7000 Master Programming ModePage 9Exiting the Master Programming Mode— Press the Extra Cycle button once more to exit the Master Program Mode and resu