Hydrotech Precision-PWS 12-12 OWNERS GUIDE User Manual download pdf (Page 52)

Pantry Faucet Assembly Diagram

2. See Pantry Faucet Assembly Diagram above. Connect the two pieces

of the pantry faucet by first wetting the O rings on the outlet spout (A) with

water or dish soap. Be careful not to damage the O rings when inserting.

Slowly rock the spout as you push it into the tap section (B). Use a cloth

wrapped around the nut first to prevent damage to the nut when

tightening. Turn the nut on the spout with pliers so that it is snug. Do not

over tighten. The O rings will provide the seal for the water. The spout

can be swivelled for convenience after installation is complete.

3. Install the faucet gasket on the faucet threads and insert the pantry faucet

threaded base through the 7/8” hole in the sink. Secure the faucet to the

sink with the faucet nut. Tighten with a basin wrench or pliers.

4. Attach ½” OD water tube to the pump outlet elbow with a ½”

Nut/Cone/Ring. Tighten with a 10” adjustable wrench or basin wrench.

CONNECTION NUT

BEFORE AFTER

O-RING

TAP (B)

OUTLET SPOUT (A)

1 2 ... 47 48 49 50 51 52 53 54 55 56 57 ... 65 66

No comments

Hydrotech Precision-PWS 12-12 OWNERS GUIDE User Manual Page 52